SWD VS IKINGSSGC MOD
I'm asking this mainly because a number of people follow both mods, and I imagine some may wish to be able to run both at the same time due to the different things each mod offers. Info : RP2040 B0 Flash Probe: 2097152 bytes in 512 sectorsĮrror: Failed to read memory at 0x00000080Įrror: Debug trampoline not found in RP2040 ROM.Įrror: RP2040 erase: failed to connect internal flashĮmbedded:startup. This has bothered me for some time, but I was wondering if, when the DWCM comes out, the SWD Team could speak to iKingsSGC about mod compatibility. Info : Read incorrect DLIPDR 00000000 (possibly CTRL/STAT value) when selecting coreid 1Įxamination failed, GDB will be halted. Info : Read incorrect DLIPDR f0000041 (possibly CTRL/STAT value) when selecting coreid 1 Polling target re1 failed, trying to reexamine Target halted due to debug-request, current mode: Thread Info : Read incorrect DLIPDR f0000040 (possibly CTRL/STAT value) when selecting coreid 0Įrror: Could not find MEM-AP to control the core Info : Read incorrect DLIPDR f0000041 (possibly CTRL/STAT value) when selecting coreid 0 In fact, the 5MHz 'ultra-fast' version (see section 3.2 of the spec) gives up multi-master and bi-directionality in order to achieve that speed. I2C is multi-master: any device can start talking at any time. was the first metal finishing and fastener sorting company in the U.S. SWD is single-master: the debug host is always controlling the bus, and occasionally reading data up from the slave. has created a tradition of exceptional production quality, complete customer satisfaction, and continuing commitment to environmental conservation. Info : Listening on port 3333 for gdb connections is located less than 30 minutes from Chicago, Illinois. Info : starting gdb server for re0 on 3333 Info : re1: hardware has 4 breakpoints, 2 watchpoints Info : re0: hardware has 4 breakpoints, 2 watchpointsĮrror: Failed to write memory at 0x38001028
Info : BCM2835 GPIO JTAG/SWD bitbang driverĮrror: Failed to read memory at 0xe0001004
Code: Select all $ openocd -f interface/raspberrypi-swd.cfg -f target/rp2040.cfg -c "program blink/blink.elf verify reset exit"
0 kommentar(er)
